0
HDD Low Level Format Tool v4.25 Portable Free & Full Download
HDD Low Level Format Tool - utility for low-level format the hard drive, and external devices connected via USB (eg flash cards). In addition, HDD Low Level Format Tool is able to provide information SMART Works with SATA, IDE and SCSI HDD size up to 281 474 976 710 655-bit output Maxtor, Hitachi, Seagate, Samsung, Toshiba, Fujitsu, IBM, Quantum, Western Digital. -
The program is completely destroys the data, conducts low-level format and allows you to resize the storage of up to 281 474 976 710 655 bytes. It works with external devices via USB and Firewire. There is the possibility to use Ultra-DMA mode.
Low-level formatting is usually done in the following cases:
If you've got a brand new hard drive from the computer and he was unprepared for the work;
if the failure appeared to track zero, which causes problems when booting from the hard drive but the drive when booting from the floppy disk is available;
if you see error messages when writing information to disk (another cause of this problem may be a faulty connector or cable);
If you return to the operating status of the old drive, for example, rearranged with a broken computer. In this case, to ensure reliable operation of the need to test drive to find and mark all the sectors that are not allowed to record;
if the drive was formatted to work with other operating systems;
if the disc has ceased to function normally and all methods of recovery have not yielded positive results;
If you are using a drive with a controller of another type. Otherwise, you may have trouble accessing the hard disk.
The data on the hard drive located on the sectors and sector information is stored, in front of each sector is a small area called the label so that's when the label is marked as "not overwriting" it and thus the new data in this sector can not enroll. But if the label is marked "overwrite" then the new data was successfully written to the sector erasing the old data. If we format the hard drive all the tags are written into "overwrite" but the information in the sector remains intact. When low-level formatted, all information is deleted to force the cells making all of the information recorded in the form of logical zeros.
It must be borne in mind that the physical format is a very potent operation - if it is satisfied the data stored on the disk will be completely erased and restored them to be absolutely impossible! Therefore, do not proceed to the low level formatting, if you are not sure what kept all the important data off your hard disk! This program cleans up the partition table, MBR, and every byte of data. The program is completely destroys any information, and then to restore the data can not be considered. After low-level formatting is necessary to partition the disk. Low-level formatting removes all and for all!
Attention! Low-level format destroys the MBR, all sections, and all user data, and therefore of no data recovery (in case of error - not the drive format you need), there can be no question - does nothing to restore it will be impossible.
Features:
Support for interfaces: S-ATA (SATA), IDE (E-IDE), SCSI, USB, FIREWIRE. Big drives (LBA-48) are also supported.
Supporting manufacturers: Maxtor, Hitachi, Seagate, Samsung, Toshiba, Fujitsu, IBM, Quantum, Western Digital.
The program also supports low-level formatting of Flash-cards using a card reader.
Home Page - http://hddguru.com
http://letitbit.net/download/49730.40274e03323eae0a4db2e0194a97/HardDiskLowLevelFormat.rar.html
http://extabit.com/file/2a0sa01lewq67/HardDiskLowLevelFormat.rar.html
0Awesome Comments!